Show Me, Tell Me Questions

Vehicle safety checks for your Module 2 practical test.

Rider Info

On your Module 2 test you will be asked vehicle safety questions. As well as answering, you must show the examiner what you mean by demonstrating it on the motorcycle where required.

Safety Questions

Oil Tell me

Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.

Identify where to check the level (dipstick or sight glass). Explain that the level should be between the max and min marks. For a dipstick: remove, wipe clean, return and remove again to check against the marks. For a sight glass: ensure the glass is clean. Ensure the machine is upright, level and the engine is cool.

Horn Show me

Show me how you would check that the horn is working on this machine (off road only).

Check is carried out by using the control (turn on ignition if necessary).

Brake Fluid Tell me

Identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic fluid.

Identify the reservoir and check the level against the high/low markings.

Lights & Reflectors Tell me

Tell me how you would check that the lights and reflectors are clean and working.

Explanation only: operate the switch (turn on ignition if necessary), identify reflectors. Check visually for cleanliness and operation.

Brake Light Show me

Show me how you would check that the brake lights are working.

Operate the brake, place a hand over the light or use reflections in windows, garage doors, etc., or ask someone to help.

Chain Tell me

Tell me how you would check the condition of the chain on this machine.

Check for chain wear, correct tension and rear wheel alignment. Tension should be adjusted as specified in the machine handbook. The drive chain should be lubricated to avoid excessive wear.

Steering Show me

Show me what checks you would make on the steering movement before using the machine.

Handlebars should be free to move smoothly from full left lock to full right lock without any control cables being stretched, trapped or pinched, and without any snagging between moving and fixed parts.

Tyres Tell me

Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient tread depth and that their general condition is safe to use on the road.

Correct tyre pressure settings can be found in the owner’s manual. Pressures should be checked using a reliable gauge. Tread depth must be at least 1mm deep, forming a continuous band at least ¾ of the breadth of the tread and all the way around. There should be no lumps, bulges or tears.

Front Brake Show me

Show me how you would check the operation of the front brake on this machine.

Wheel the machine forward and apply the front brake.

Brakes Show me

Show me how you would check the operation of the brakes on this machine.

Check for excessive travel on the brake lever and the brake pedal and for unusual play or sponginess.

Emergency Cut Out Show me

Show me how you would check the operation of the engine cut out switch.

Operate the switch without the engine being started.

Rear Fog Light Show me

Show me how you would switch on the rear fog light and explain when you would use it (if fitted).

Operate the switch (turn on ignition and dipped headlights if necessary). Check the warning light is on. Explain use.

Headlight Show me

Show me how you switch your headlight from dipped to main beam.

Operate the switch (with ignition or engine on if necessary), check with the main beam warning light.

Pillion Passenger Questions

On your Module 2 practical test your examiner will ask one of the following questions at the beginning of the test.

What advice would you give a pillion passenger?

  • Make sure they are wearing the correct clothing including an approved safety helmet.
  • Make sure they sit astride, facing forwards, with their feet on the foot pegs at all times.
  • Tell them where to hold — either the rider or the grab rail.
  • Don’t fidget about.
  • Lean with the rider and the bike into the corners.
  • Don’t do any arm signals.
  • Don’t look over my shoulder.

What adjustments would you make to the bike if you were taking a pillion passenger?

  • Increase the tyre pressures according to the manufacturer’s advice (owner’s manual).
  • Adjust the suspension according to the manufacturer’s advice (owner’s manual).
  • Fold the foot pegs down.
  • Adjust the headlights according to the manufacturer’s advice (owner’s manual).
  • Adjust the mirrors up, as the back will squat down.

How is the extra weight on the back going to affect the handling?

  • Acceleration is affected. On a more powerful bike the front could go very light.
  • Deceleration is affected — stopping distances increase.
  • Cornering is affected — centre of gravity is higher, so it is wise to enter corners slower.
  • Front wheel is lighter, so steering can feel a little vague.

What would affect your balance?

  • Wind
  • Drink / drugs
  • Poorly maintained machine
  • Additional weight
  • Road surface